Date: Thu, 10 Nov 1994 15:38:01 PST
Subject: SX50 green monitors
From: "Dr. Claudio Cermignani"
Cc: John Fournelle
X-Sender: claudio@quartz.geology.utoronto.ca
Message-Id:
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

The monitors' scanning is controlled by the SX50. As for the folded over
images, the problem appears to be with the monitor's power supply
(located in the backside of the monitor) to the X scanning. Check the two
regulators on the X-scanning and replace both, even if only one is shot.
Check 15V and 20V lines. Good luck.

Claudio Cermignani
Dept of Geology
Microprobe Lab
University of Toronto